F21Amana · Washer

Amana Washer F21: Official Meaning and Checks

Routine checkStart with the safe checks below.

Direct answer

What F21 means

Official Amana material describes F21 as F21 indicates a drain problem. This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.

Before you begin

Safety first

Safety review is complete for the owner-accessible checks shown here. Do not remove panels, bypass controls, or test live circuits.

  • Record the complete displayed code and the full model number before clearing the display.
  • Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
  • Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.

Does this guide apply?

Region
United States
Product family
Front Load Washers (URL category: Laundry/Washers/FrontLoadWashers/ErrorCodes/%22F%22ErrorCodes)
Scope note
The cited source scope is Front Load Washers (URL category: Laundry/Washers/FrontLoadWashers/ErrorCodes/%22F%22ErrorCodes). Confirm the complete model number before applying the guidance; an empty model list does not imply all models.

Common paths to check

These are source-backed possibilities, not probability estimates for your specific unit.

  • 01 Official source meaning: F21 indicates a drain problem.

Decision path

Safe checks, in order

  1. 1

    Confirm code and model scope

    Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.

    Expected: The official source explicitly covers the displayed code and product family.

    If not resolved: Contact manufacturer support with the full model and serial number.

  2. 2

    Follow the official owner checks

    Try the following method to resolve: Is the drain hose kinked? Is the drain hose clogged? Cycle power to the control to reset the washer: Much like a computer, resetting the washer control can sometimes solve the issues you are experiencing. To reset the washer control panel, it needs to be disconnected from the power source for 5 minutes. If your washer is plugged into an outlet, simply unplug the unit for 5 minutes and then plug the unit back in.

    Expected: Only the user-accessible condition identified by the official source is corrected.

    If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.

Reset and test

  1. Cycle power to the control to reset the washer:; Much like a computer, resetting the washer control can sometimes solve the issues you are experiencing. To reset the washer control panel, it needs to be disconnected from the power source for 5 minutes. If your washer is plugged into an outlet, simply unplug the unit for 5 minutes and then plug the unit back in.

Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.

Escalation point

Stop and arrange service when

  • The code returns after the cited user-accessible checks or the official source directs professional service.
  • The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.

Official sources

We paraphrase manufacturer material and show the publication scope so you can verify it.

  1. F21 - Front Load Washer, section: Possible Solutions body Amana · F21 (Front Load Washers); source fingerprint 503b8cf5172d788223c84e5278adb227bb14e2285efbc935577829dd63432519 (SHA-256 of page body text) · accessed 2026-08-08

Reviewed by Device Fix Guide · Last source check: