E24Bosch · Dishwasher

Bosch Dishwasher E24: Meaning and Safe Checks

Use cautionDisconnect utilities where directed before checking.

Direct answer

What E24 means

Bosch dishwasher code E24 indicates a drainage problem. Official Bosch guidance points to a blocked or kinked drain path, a loose pump cover, a clogged air gap, or a disposer connection that is still sealed.

Search/display variants: E24, E:24, E-24

Before you begin

Safety first

Standing water and pump-area debris can be hot or sharp. Disconnect electrical power before reaching into the sump or handling the pump cover.

  • Cancel the cycle and let hot water cool before opening the filter area.
  • Switch off and unplug the dishwasher before touching the pump area.
  • Wear cut-resistant gloves because broken glass may be hidden below the filter.

Does this guide apply?

Region
United States
Product family
Bosch dishwashers with a digital fault display
Exact models
Not listed in the cited source. Confirm the full model in the official manual.
Scope note
Controls and access points vary. Confirm E24 in the manual for the exact E-Nr before removing a filter or cover.

Common paths to check

These are source-backed possibilities, not probability estimates for your specific unit.

  • 01 The filter, drain pump area, air gap, or drain hose is blocked by debris.
  • 02 The drain hose is kinked or sharply bent behind the dishwasher.
  • 03 The drain-pump cover is loose or not fully locked into position.
  • 04 A new garbage disposer still has its dishwasher inlet knockout plug installed.

Decision path

Safe checks, in order

  1. 1

    Inspect the visible drain path

    With power disconnected and the water cool, remove the filter only as described in the model manual, clear visible standing water and loose debris, and confirm the pump cover is seated.

    Expected: The filter area is clear and the pump cover locks fully into place.

    If not resolved: Continue to the external drain-hose, air-gap, and disposer checks.

  2. 2

    Check the hose and air gap

    Inspect the accessible drain hose for a sharp bend. If the sink has an air gap, check it for debris without dismantling any hard-wired appliance parts.

    Expected: The hose has a smooth path and the air gap is not visibly blocked.

    If not resolved: Have a qualified service provider inspect the drain pump and concealed plumbing.

  3. 3

    Check a new disposer connection

    If a garbage disposer was recently installed, ask the installer to confirm that its dishwasher-inlet knockout plug was removed before the drain hose was connected.

    Expected: The disposer inlet is open and the drain hose is correctly attached.

    If not resolved: Stop repeated reset attempts and arrange service if E24 returns.

Reset and test

  1. Restore power only after all covers and filters are correctly reinstalled.
  2. Use the model-specific cancel or reset procedure in the owner manual.
  3. Run a short rinse cycle and watch for normal drainage and leaks.

Important: A reset only clears the display; it does not remove an obstruction or repair a failed drain component.

Escalation point

Stop and arrange service when

  • Water leaks from the cabinet, wiring, or hose connection.
  • The pump area contains glass that cannot be removed without disassembly.
  • E24 returns after the accessible drain path is confirmed clear.

Model-first repair planning

Components that may be involved

The items below describe the documented diagnostic path. They are not a diagnosis and do not identify a compatible replacement part without the complete model and original part number.

  • drain filter
  • drain pump cover
  • drain hose
  • air gap
  • garbage disposer inlet
Check compatibility before buying parts or booking service

Budget before booking

Estimated repair cost

These are United States market ranges as of , not a diagnosis or binding quote. Ask whether the service-call fee is included or credited.

$0

Clean the accessible filter and pump area yourself

This assumes the Bosch model manual identifies the filter and pump cover as user accessible and no damaged part is found.

Includes
owner labor, no replacement part
Sources: [1]

$80–$180

Professional hose, air-gap, or filter service

The actual charge depends on which restriction is found and whether the diagnostic fee is credited to the repair.

Includes
typical parts, labor
Sources: [2]

$100–$400

Professional dishwasher drain-pump replacement

A code alone does not prove that the drain pump has failed; diagnosis should rule out the accessible drain path first.

Includes
drain pump, labor
Sources: [2]

National consumer cost guides and manufacturer-supported repair paths; estimates are not quotes and exclude tax, emergency fees, plumbing work, warranty coverage, and unusual access costs.

Price-estimate sources
  1. Dishwasher Troubleshooting: Dishwasher Is Not Draining Bosch Home Appliances · accessed 2026-08-08
  2. How Much Does Dishwasher Repair Cost? (2026) HomeGuide · accessed 2026-08-08

Model-specific purchase paths

Possible parts and purchase links

These links are currently untracked reference links; Device Fix Guide does not earn a commission from them. Affiliate disclosure

Do not order by error code alone.

Copy the complete model number from the appliance label, then confirm the original part number, revision, voltage, and seller fit list. A listed part is a possible repair path, not a diagnosis.

Dishwasher drain pump

Only after the accessible filter, pump area, hose, air gap, and disposer connection have been checked and a pump fault is diagnosed.

Compatibility: Match the complete Bosch E-Nr and the original part number; E24 is used across models with different pumps.

Drain hose or air-gap component

When inspection finds a split, permanent kink, failed connection, or damaged air-gap component rather than a removable blockage.

Compatibility: Confirm hose diameter, length, routing, fittings, and the full dishwasher model before ordering.

Manufacturer-provided demonstrations

Repair and maintenance videos

Confirm that the appliance layout in a video matches your exact model before following it.

Manufacturer provided

How to Clean Your Bosch Dishwasher Filter Like a Pro

Shows routine filter removal and cleaning; use the exact model manual before accessing the pump cover.

Safety: Disconnect power before reaching into the sump, and use caution because broken glass or sharp debris may be present.

Watch on YouTube

Official sources

We paraphrase manufacturer material and show the publication scope so you can verify it.

  1. Bosch Dishwasher Error Code E24 Bosch · E24 meaning and troubleshooting steps · accessed 2026-08-07
  2. Dishwasher Error Codes Bosch · E24 / E-24 section · accessed 2026-08-07

Reviewed by Device Fix Guide · Last source check:

Related guides for this equipment

These links share the same brand and equipment family. A related guide does not prove that the codes have the same cause on your model.