Electrolux Refrigerator DI: Official Meaning and Checks
Direct answer
What DI means
Official Electrolux material describes DI as Description Indicates there is ice jammed in the shoot. This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.
Before you begin
Safety first
Safety review is complete for the owner-accessible checks shown here. Do not remove panels, bypass controls, or test live circuits.
- Record the complete displayed code and the full model number before clearing the display.
- Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
- Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.
Does this guide apply?
- Region
- United States
- Product family
- Refrigerators (the article may not list specific models)
- Exact models
- Not listed in the cited source. Confirm the full model in the official manual.
- Scope note
- The cited source scope is Refrigerators (the article may not list specific models). Confirm the complete model number before applying the guidance; an empty model list does not imply all models.
Find the model label and official manual before ordering a part
Common paths to check
These are source-backed possibilities, not probability estimates for your specific unit.
- 01 Official source meaning: Description Indicates there is ice jammed in the shoot.
Decision path
Safe checks, in order
- 1
Confirm code and model scope
Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.
Expected: The official source explicitly covers the displayed code and product family.
If not resolved: Contact manufacturer support with the full model and serial number.
- 2
Follow the official owner checks
An alarm will sound when a cube is stuck in the shoot too long. Ice has melted and frozen around the auger due to infrequent use, temperature fluctuations, and/or power outages. Ice cubes are jammed between the ice maker and the back of the ice bin How to clear Ice Jam Remove the ice bin, thaw, and empty the contents. Clean the container, wipe dry, and replace it in the proper position. When new ice is made, the dispenser should operate. Remove ice cubes jamming the dispenser. How to reset/clear Error Codes Depending on upon which model your unit is, you may try one of the following: Pressing "“CLEAR ALERTS" button on the unit. Reset the unit by unplugging the unit for 30 seconds and plugging it back in. If you are unable to unplug the unit, you can try flipping the breaker at the fuse box, please note that this will reset everything on same circuit. For more information please refer to your use and care guide. I IF YOU WERE UNABLE TO RESOLVE YOUR ISSUE For units installed within the past 30 days, please refer back to your installer to resolve this issue. For units installed after 30 days please contact us to schedule service.
Expected: Only the user-accessible condition identified by the official source is corrected.
If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.
Reset and test
- How to reset/clear Error Codes Depending on upon which model your unit is, you may try one of the following: Pressing "“CLEAR ALERTS" button on the unit.; Reset the unit by unplugging the unit for 30 seconds and plugging it back in.; If you are unable to unplug the unit, you can try flipping the breaker at the fuse box, please note that this will reset everything on same circuit.
Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.
Escalation point
Stop and arrange service when
- The code returns after the cited user-accessible checks or the official source directs professional service.
- The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.
Model-first repair planning
Components that may be involved
The items below describe the documented diagnostic path. They are not a diagnosis and do not identify a compatible replacement part without the complete model and original part number.
- ice maker
- auger
- circuit breaker
Official sources
We paraphrase manufacturer material and show the publication scope so you can verify it.
- Page title: Refrigerator Error Code DI SP or DISP - Ice Jam | Electrolux Electrolux · Refrigerator Error Code DI SP or DISP - Ice Jam; source fingerprint 0f72166b6497288d19064089d2c2abab79f00dc016f10124d092a53b91a0db5e (body-text SHA-256) · accessed 2026-08-08
Reviewed by Device Fix Guide · Last source check:
Related guides for this equipment
These links share the same brand and equipment family. A related guide does not prove that the codes have the same cause on your model.
Did this guide match your model?
Report a mismatch, missing model family or outdated manufacturer source. Include the page URL and an official manual link, but do not send a serial number or personal information.
Report a correction