Electrolux Washer HO: Official Meaning and Checks
Direct answer
What HO means
Official Electrolux material describes HO as HO SE means condition is detected where the inlet hoses have been installed incorrectly (hot supply to cold inlet and cold supply to hot inlet), the washer will alert you. This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.
Before you begin
Safety first
Safety review is complete for the owner-accessible checks shown here. Do not remove panels, bypass controls, or test live circuits.
- Record the complete displayed code and the full model number before clearing the display.
- Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
- Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.
Does this guide apply?
- Region
- United States
- Product family
- Front loading laundry washers. (the article may not list specific models)
- Scope note
- The cited source scope is Front loading laundry washers. (the article may not list specific models). Confirm the complete model number before applying the guidance; an empty model list does not imply all models.
Common paths to check
These are source-backed possibilities, not probability estimates for your specific unit.
- 01 Official source meaning: HO SE means condition is detected where the inlet hoses have been installed incorrectly (hot supply to cold inlet and cold supply to hot inlet), the washer will alert you.
Decision path
Safe checks, in order
- 1
Confirm code and model scope
Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.
Expected: The official source explicitly covers the displayed code and product family.
If not resolved: Contact manufacturer support with the full model and serial number.
- 2
Follow the official owner checks
Troubleshooting Note: Make sure you turn off the water first. LED will display “HO” followed by “SE” and then the remaining cycle time (0 min) for 60 seconds and then repeat. Press the cancel button. Shut off each water supply valve and attach each supply hose to the correct inlet connection on the washer. IF YOU WERE UNABLE TO RESOLVE YOUR ISSUE For units installed within the past 30 days, please refer back to your installer to resolve this issue. For units installed after 30 days please contact us to schedule service.
Expected: Only the user-accessible condition identified by the official source is corrected.
If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.
Reset and test
- Press the cancel button.
Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.
Escalation point
Stop and arrange service when
- The code returns after the cited user-accessible checks or the official source directs professional service.
- The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.
Official sources
We paraphrase manufacturer material and show the publication scope so you can verify it.
- Page title: Laundry front loading washer displaying Error Code HO SE reversed hose detection. | Electrolux Electrolux · Laundry front loading washer displaying Error Code HO SE reversed hose detection.; source fingerprint af0cdaa6bd9b2fc8a7aa4fa5ce5ddbff8661564a3fe7f9fc65c863abf39b9574 (body-text SHA-256) · accessed 2026-08-08
Reviewed by Device Fix Guide · Last source check: