C7GE Appliances · Dishwasher

GE Appliances Dishwasher C7: Official Meaning and Checks

Use cautionDisconnect utilities where directed before checking.

Direct answer

What C7 means

Official GE Appliances material describes C7 as The dishwasher's water temperature sensor circuit has become inoperative. This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.

Before you begin

Safety first

If the problem persists, contact service.

  • Record the complete displayed code and the full model number before clearing the display.
  • Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
  • Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.

Does this guide apply?

Region
United States
Product family
GE dishwashers with electronic controls (not all codes on all models).
Exact models
Not listed in the cited source. Confirm the full model in the official manual.
Scope note
The cited source scope is GE dishwashers with electronic controls (not all codes on all models).. Confirm the complete model number before applying the guidance; an empty model list does not imply all models.

Find the model label and official manual before ordering a part

Common paths to check

These are source-backed possibilities, not probability estimates for your specific unit.

  • 01 Official source meaning: The dishwasher's water temperature sensor circuit has become inoperative.

Decision path

Safe checks, in order

  1. 1

    Confirm code and model scope

    Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.

    Expected: The official source explicitly covers the displayed code and product family.

    If not resolved: Contact manufacturer support with the full model and serial number.

  2. 2

    Follow the official owner checks

    Disconnect the power at the circuit breaker for about 30 seconds and then reset the dishwasher.

    Expected: Only the user-accessible condition identified by the official source is corrected.

    If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.

Reset and test

  1. Yes (official: breaker off ~30 seconds, then reset).

Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.

Escalation point

Stop and arrange service when

  • If the problem persists, contact service.
  • The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.

Model-first repair planning

Components that may be involved

The items below describe the documented diagnostic path. They are not a diagnosis and do not identify a compatible replacement part without the complete model and original part number.

  • Water temperature sensor circuit
Check compatibility before buying parts or booking service

Official sources

We paraphrase manufacturer material and show the publication scope so you can verify it.

  1. Dishwasher - Error, Fault or Function Codes GE Appliances · C7 · accessed 2026-08-08

Reviewed by Device Fix Guide · Last source check:

Related guides for this equipment

These links share the same brand and equipment family. A related guide does not prove that the codes have the same cause on your model.

C6 GE Appliances Dishwasher C6: Official Meaning and Checks H2O GE Appliances Dishwasher H2O: Official Meaning and Checks 999 GE Appliances Dishwasher 999: Official Meaning and Checks C3 GE Appliances Dishwasher C3: Official Meaning and Checks FTD GE Appliances Dishwasher FTD: Official Meaning and Checks PrS GE Appliances Dishwasher PrS: Official Meaning and Checks