SEKitchenAid · Microwave

KitchenAid Microwave SE: Official Meaning and Checks

Routine checkStart with the safe checks below.

Direct answer

What SE means

Official KitchenAid material describes SE as Reset power to the product: There is a problem with the Keypad (User Interface) or the associated wiring. This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.

Before you begin

Safety first

Safety review is complete for the owner-accessible checks shown here. Do not remove panels, bypass controls, or test live circuits.

  • Record the complete displayed code and the full model number before clearing the display.
  • Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
  • Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.

Does this guide apply?

Region
United States
Product family
Over-the-Range Microwave (URL category: Cooking/Microwaves/Over-the-RangeMicrowave/ErrorCode/OtherErrorCodes)
Scope note
The cited source scope is Over-the-Range Microwave (URL category: Cooking/Microwaves/Over-the-RangeMicrowave/ErrorCode/OtherErrorCodes). Confirm the complete model number before applying the guidance; an empty model list does not imply all models.

Common paths to check

These are source-backed possibilities, not probability estimates for your specific unit.

  • 01 Official source meaning: Reset power to the product: There is a problem with the Keypad (User Interface) or the associated wiring.

Decision path

Safe checks, in order

  1. 1

    Confirm code and model scope

    Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.

    Expected: The official source explicitly covers the displayed code and product family.

    If not resolved: Contact manufacturer support with the full model and serial number.

  2. 2

    Follow the official owner checks

    Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Monitor the microwave oven for one (1) minute to ensure the error code does not display again. Verify microwave oven operation.

    Expected: Only the user-accessible condition identified by the official source is corrected.

    If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.

Reset and test

  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.; Power unit up by turning on the circuit breaker(s).

Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.

Escalation point

Stop and arrange service when

  • The code returns after the cited user-accessible checks or the official source directs professional service.
  • The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.

Official sources

We paraphrase manufacturer material and show the publication scope so you can verify it.

  1. SE - Error Code - Over-the-Range Microwave, section: Possible Solutions body KitchenAid · SE (Over-the-Range Microwave); source fingerprint 1ff93206d92a4a777e1c4f0c3636d1cd7dc2900b0358ab822b7e0ca811a732f3 (SHA-256 of page body text) · accessed 2026-08-08

Reviewed by Device Fix Guide · Last source check: