dETMaytag · Washer

Maytag Washer dET: Official Meaning and Checks

Routine checkStart with the safe checks below.

Direct answer

What dET means

Official Maytag material describes dET as This error code indicates that the detergent dispenser cartridge is not detected . This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.

Before you begin

Safety first

Safety review is complete for the owner-accessible checks shown here. Do not remove panels, bypass controls, or test live circuits.

  • Record the complete displayed code and the full model number before clearing the display.
  • Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
  • Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.

Does this guide apply?

Region
United States
Product family
Front Load Washers (URL category: Laundry/Washers/FrontLoadWashers/ErrorCodes/OtherErrorCodes)
Scope note
The cited source scope is Front Load Washers (URL category: Laundry/Washers/FrontLoadWashers/ErrorCodes/OtherErrorCodes). Confirm the complete model number before applying the guidance; an empty model list does not imply all models.

Common paths to check

These are source-backed possibilities, not probability estimates for your specific unit.

  • 01 Official source meaning: This error code indicates that the detergent dispenser cartridge is not detected .

Decision path

Safe checks, in order

  1. 1

    Confirm code and model scope

    Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.

    Expected: The official source explicitly covers the displayed code and product family.

    If not resolved: Contact manufacturer support with the full model and serial number.

  2. 2

    Follow the official owner checks

    If you are using single-load doses of detergent, ignore this message. Ensure the dispenser cartridge is inserted correctly and the drawer shuts completely. See your Owner's Manual for further information on your Optimal Dispense Cartridge.

    Expected: Only the user-accessible condition identified by the official source is corrected.

    If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.

Reset and test

A user reset is not documented for this condition.

Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.

Escalation point

Stop and arrange service when

  • The code returns after the cited user-accessible checks or the official source directs professional service.
  • The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.

Official sources

We paraphrase manufacturer material and show the publication scope so you can verify it.

  1. dET - Front Load Washer, section: Possible Solutions body Maytag · dET (Front Load Washers); source fingerprint c034dd2961153b7ae2e8ae06ea43be03913104ca241bf2ff12b8b84bef86008f (SHA-256 of page body text) · accessed 2026-08-08

Reviewed by Device Fix Guide · Last source check: