E2Samsung · Washer

Samsung Washer E2: Official Meaning and Checks

Use cautionDisconnect utilities where directed before checking.

Direct answer

What E2 means

Official Samsung material describes E2 as Jammed button error: a button on the panel is detected as stuck or continuously pressed. This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.

Also shown as: bE2, 6E2, 8E2

Before you begin

Safety first

Safety review is complete for the owner-accessible checks shown here. Do not remove panels, bypass controls, or test live circuits.

  • Record the complete displayed code and the full model number before clearing the display.
  • Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
  • Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.

Does this guide apply?

Region
United States
Product family
Samsung front-load washing machines with a digital display; models without a digital display show error codes as blinking-light combinations
Scope note
The cited source scope is Samsung front-load washing machines with a digital display; models without a digital display show error codes as blinking-light combinations. Confirm the complete model number before applying the guidance; an empty model list does not imply all models.

Common paths to check

These are source-backed possibilities, not probability estimates for your specific unit.

  • 01 Official source meaning: Jammed button error: a button on the panel is detected as stuck or continuously pressed.

Decision path

Safe checks, in order

  1. 1

    Confirm code and model scope

    Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.

    Expected: The official source explicitly covers the displayed code and product family.

    If not resolved: Contact manufacturer support with the full model and serial number.

  2. 2

    Follow the official owner checks

    Power off the washer, then individually touch every button on the panel, working it back and forth to reach all edges before releasing.

    Expected: Only the user-accessible condition identified by the official source is corrected.

    If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.

Reset and test

  1. Power off/on is the official recovery.

Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.

Escalation point

Stop and arrange service when

  • The code returns after the cited user-accessible checks or the official source directs professional service.
  • The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.

Official sources

We paraphrase manufacturer material and show the publication scope so you can verify it.

  1. Washing machine displays an error code (SW1) - Full error-code list (water level/leakage, filling, hot/cold, drain, overflow, buttons, voltage, door, detergent drawer, suds, Add… Samsung · E2, bE2, 6E2, BE2, 8E2 · accessed 2026-08-08

Reviewed by Device Fix Guide · Last source check: